Find High Thermal Efficiency Vacuum Drying Oven, Vacuum Tray Drying Oven Machine, Vacuum Tray Drying Oven Equipment on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > SS Thermal Insulation Pipe > High Thermal Efficiency Vacuum Drying Oven

High Thermal Efficiency Vacuum Drying Oven

  • High Thermal Efficiency Vacuum Drying Oven
  • High Thermal Efficiency Vacuum Drying Oven
  • High Thermal Efficiency Vacuum Drying Oven
  • High Thermal Efficiency Vacuum Drying Oven

High Thermal Efficiency Vacuum Drying Oven

    Unit Price: 6500~21500 USD
    Payment Type: T/T,L/C
    Min. Order: 1 Set/Sets
    Delivery Time: 30 Days
    Packaging: Wooden Case
    Productivity: 25Sets
    Brand: Ruide
    Transportation: Ocean
    Place of Origin: China
    Supply Ability: 5Sets/Month
    Certificate: ISO9001

Basic Info

Model No.: FZG

Product Description

High Thermal Efficiency Vacuum Drying Oven

Vacuum Tray Dryer (VTD) is suitable for drying of thermal sensitive materials easily resolved, polymerized of deteriorated under higher temperature. Sterilization can be conducted prior to the drying process, during which no matter is allowed to enter the product. Static vacuum dryer eliminates the configuration damage of the drying materials therefore widely used in pharmaceutical, chemicals and foodstuff etc.

Working Principle

Tt is well known that vacuum drying is to put raw material under the state of vacuum fo r heating and drying If use vacuum to pump air and humidity out,the dry speed will be faster.
Nole:if use condense5 the solvent in raw material can be recovered If the solvent is wate r,condenser might be canceled and the investment and every could be saved.
Vacuum Tray Drying Machine Characiteristics
◎Under the condition of vacuum,the boiling point of raw material will decrease and make the evaporation efficiency highen The refore for a certain amount of heat transfer,the conducting area of d ryer can be saved.
◎The heat sou rce for evaporation may be low pressu re steam or surplus heat steam.
◎The heat loss ls Iess.
◎Before drying,the treatment of disinfection may be carried Out During the period of drying,there is no impurity material mixed. It is in conformity.
It belongs to static dryer.So the shape of raw mate rial to be d ried should not be destroyed.
Material to be dried

It is suitable for drying heat sensitive raw materials that can decompose or polymerize or deteriorate at high temperature.It is widely used in pharmaceutical,chemical,foodstuff and electronic industries.

Technical Parameter

model
name
YZG-600 YZG-800 YZG-1000 YZG-1400A FZG-10 FZG-15 FZG-20
inter size of
drying chamber,mm
Φ600×976 Φ800×1247 Φ1000×1527 Φ1400×2054 1500×1060
×1220
1500×1400
×1220
1500×1800
×1220
outer size of
drying chamber,mm
1135×810
×1024
1700×1045
×1335
1693×1190
×150
2386×1675
×1920
1513×1924
×1720
1513×1924
×2060
1513×1924
×2500
layers of
baking support
4 4 6 8 5 8 12
interval,mm 82 82 102 102 122 122 122
size of barking
tray,mm
310×600
×45
520×410
×45
520×410
×45
460×640
×45
460×640
×45
460×640
×45
460×640
×45
quantity of
baking tray
4 8 12 32 20 32 48
working pressure
inside the pipe of
baking support,Mpa
≤0.784 ≤0.784 ≤0.784 ≤0.784 ≤0.784 ≤0.784 ≤0.784
operation temperature
of baking support, oC
35-150 35-150 35-150 35-150 35-150 35-150 35-150
degree of vacuum inside
the chamber when
operation in the,Mpa
-0.09~0.096
under the condition
of -0.1Mpa and
110oC,evaporation
rate of water,kg/m2.hr
7.2 7.2 7.2 7.2 7.2 7.2 7.2
When condensor is
used,Model,and power
of vacuum pump,kw
2X-15A
2KW
2X-30A
3KW
2X-30A
3KW
2X-70A
5.5KW
2X-70A
5.5KW
2X-70A
5.5KW
2X-90A
2KW
When condensor is not
used,Model,and power
of vacuum pump,kw
SK-0.8
2.2KW
SK-2.7
4KW
SK-3
5.5KW
SK-6
11KW
SK-3
5.5KW
SK-6
11KW
SK-6
11KW
Weight of drying
chamber,kg
250 600 800 1400 1400 2100 3200

Note:SZ water ring vacuum pump can be used together with mechanical pressure increasing pump in order to increase vacuum.

OPTIONALS:

  • Condenser and receiver are made in SS 316
  • 300 mm wide SS 304 skirting all along the flange
  • 50 mm thick glass wool insulation on the vacuum chamber outer surface except door. The insulation is enclosed and covered with removable SS 304 angle frame
  • Digital temperature controller with pneumatic operated valve at hot water/steam inlet
  • 2 stage water ring type vacuum pump (partial SS) run by FLP motor
  • Hot water system with circulation pump



Changzhou Ruide Drying Engineering Technology Co., Ltd

 

Changzhou Ruide Drying Engineering Technology Co., Ltd. is a professional manufacturer of drying, mixing, granulating and grinding equipment. Our firm has strong technical force and adopts CAD system, with a modern workshop. Our company is located in the economic center of Yangtze River Delta - Changzhou. Our company has a large-scale manufacturing site. The engineers and technicians account for more than 70% of total staff members. In accordance with the national GMP standard, Our company has a professional team with support from Tianji University, Dalian university of technology and many other famous universities. We keep up with the latest international development within our scope and advocate scientific orientation. Our company is possessed with excellent means of detection and advanced conception of management. We can meet the requirements of domestic and international customers. The production of our equipment conforms strictly to the ISO9001 international quality management system. Their successful application is in the scope of pharmaceutical,chemical, foodstuff industries and so on, which has achieved the internationalization of the product quality. The honest and practical conduct of enterprise, excellent product quality, precise follow-up maintenance service and excellent after-sale service have gained us market and credit.

Company Info

  • Company Name: Changzhou Ruide Drying Engineering Technology Co., Ltd
  • Representative: Zhongxing Liu
  • Product/Service: Drying Equipment , Mixing Equipment , Granulating Equipment , Sieving Equipment , Grinding Equipment , Conveying Equipment
  • Capital (Million US $): 10,000,000RMB
  • Year Established: 2015
  • Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
  • Export Percentage: 71% - 80%
  • Total Annual Purchase Volume (Million US $): Below US$1 Million
  • No. of Production Lines: 3
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: Fewer than 5 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 3,000-5,000 square meters
  • Factory Location: Jiaoxi Town, Wujin District, Changzhou City, Jiangsu Province
  • Contact Person: Mr. Denis
  • Tel: 86-519-68231907
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters